Excavator hydraulic pump pressure adjustment is a critical process to ensure optimal performance and longevity of the machine. Proper hydraulic pump pressure not only helps to increase the efficiency and power of the excavator, but also prevents possible breakdowns and unnecessary maintenance costs.
In these settings, it is very important to pay attention to the manufacturer’s instructions and use accurate measuring tools. By following correct and safety procedures, precise adjustments can be achieved that improve excavator performance and prevent potential breakdowns.
To inquire excavator price Get in touch with our experts: 09134315128
Pressure adjustment of excavator hydraulic pump
Follow the steps below to set the excavator hydraulic pump pressure correctly and accurately:
1. Preparation And Equipment Required
• Suitable location: Park the excavator on a level and safe surface to prevent unwanted movement.
• Stopping the engine: Turn off the excavator engine and remove the main switch to prevent the machine from being started unintentionally.
• Tools Required: Use accurate pressure measuring tools such as a hydraulic pressure gauge, appropriate wrenches, and a user manual to access accurate information.
buy Komatsu 850 excavator
2. find port pressure
• Port location: Locate the hydraulic pump pressure port on the excavator’s hydraulic system. This port is usually located near the pump and is clearly marked in the user manual.
• Check connections: Make sure all connections in this area are tight and free of leaks.
3. Installation Gauge Pressure
• Pressure gauge connection: Connect the pressure gauge to the pressure port. Make sure the connection is tight and leak-free. It may be necessary to use teflon tape or special fittings to prevent leakage.
• Recheck: After connecting the gauge, check that there are no leaks and that the gauge is working properly.
4. on on engine
• Warming up the system: Start the excavator engine and let it run for a few minutes to warm up the hydraulic system. This allows the hydraulic oil to reach operating temperature and the pressure to be measured more accurately.
• Monitoring: During this time, monitor the system to make sure everything is working properly and there are no leaks.
buy Hitachi 470 excavator< /h4>
5. setting pressure
• Locating the pressure regulating valve: Locate the pressure regulating valve on the hydraulic pump. This valve is usually identified by an adjustable screw or valve and may be protected by a cover.
• Pressure adjustment: Using the appropriate tool, turn the adjustment screw slowly. To increase the pressure, turn the screw clockwise and to decrease the pressure, turn the screw counterclockwise. Watch the pressure gauge as you turn the screw to reach the desired pressure.
• According to specifications: Adjust the pressure to the value recommended in the user manual. This amount usually varies based on the type and model of the excavator.
To buy and consult with our experts: 03137475120
Final test and check for pressure adjustment of excavator hydraulic pump
• Performance check: After adjusting the pressure, cut off the operation of the excavator do thirty Make sure all functions are working properly and there are no leaks or malfunctions in the hydraulic system.
• Shutting down the engine: Shut down the engine and disconnect the pressure gauge from the pressure port.
• Final Check of Connections: Check all connections and make sure everything is tight and there are no leaks.
• Reset: Replace any protective covers or parts you opened to access ports and adjustment vents.
By following these steps, you can properly set your excavator’s hydraulic pump pressure and ensure optimal performance and longer life for your machine. Accurate and correct adjustment of hydraulic pressure helps to increase efficiency, reduce fuel consumption and prevent possible breakdowns.
comparison of Hyundai and Komatsu excavators
Concluding remarks:
Excavator hydraulic pump pressure adjustment not only ensures improved performance and efficiency of the device, but also prevents unwanted breakdowns and high maintenance costs. By carefully following the steps of adjusting the pressure and using the right tools, you can ensure that the excavator works with maximum efficiency and safety. This process, by optimizing the hydraulic pressure, not only helps to extend the life of the device, but also increases the productivity in construction and industrial operations.
Buy PC220-7 Excavator
FAQ
1. Why is it important to adjust the pressure of the excavator hydraulic pump?
Excavator hydraulic pump pressure adjustment is important because proper pressure improves performance, increases efficiency and prevents premature failures in the hydraulic system.
2. How to adjust the hydraulic pump pressure of the excavator?
To adjust the hydraulic pump pressure, first turn off the engine and connect the pressure gauge to the pressure port. Then turn on the engine and turn the pressure adjustment screw until the correct value is reached and finally check the connections.
3. What signs indicate the need to readjust the pressure of the hydraulic pump?
Symptoms such as reduced performance, hydraulic oil leakage, abnormal noise from the pump and instability in excavator movements indicate the need to reset the hydraulic pump pressure.
Types of excavators< /h4>
Purchase and sale of new and used road construction, mining and drilling machines:
In addition to new machines and spare parts, in the Desert Machine Spadana company, used road construction and mining machines with warranty and after-sales services are also provided, which are as follows:
Ourday hydraulic hammer, Loader, Excavator, dump truck , Lift Truck, backhoe, drill wagon , Grader , Bulldozer and…, contact our experts for advice and prices at Be
Spadana Desert Machine Company
Spadana Desert Machine Company is registered in the province of Isfahan for the purpose of importing road construction and mining machinery, and also the only exclusive representative of Hyundai Everday hydraulic hammer is in the whole country. The management of the company has expanded its activity in the field of import and sale of road construction and mining machinery, related parts and equipment, relying on its decades of experience in the field of mining contracting and road construction and construction projects. Therefore, realizing the lack of quality machines in the country and despite problems such as sanctions and customs issues, he started directly importing machines from reputable global factories, and in this regard, he signed a cooperation agreement with Sumitomo Company of Japan in 2002. He pointed out that the result was the import of the first series of zero Komatsu machines to Iran. It is hoped that by trusting in the Almighty God and with the aim of gaining the satisfaction of our dear customers, we can take our firm steps more and more for the prosperity of dear Iran.
Communication ways of Mashi desert N. Spadana
Isfahan, kilometer 3 Zob Ahan road, right side crossing